Masimo Pulse Oximetry for Urgent Care, Clinics and Long-Term Care
Other settings: EMS and Fire Departments, Flight and critical care transport.
Urgent care centers, clinics, long-term care, surgery centers and home infusion teams can reorder genuine Masimo pulse oximetry supplies from us, an Authorized Masimo Distributor (USA): reusable finger sensors, adhesive sensors by the box and replacement tape.
Match the sensor to your monitor
LNCS sensors use LNC cables; M-LNCS sensors use M-LNC or Rainbow RC cables.
- Masimo Rad-57: Masimo's operator's manual pairs LNCS sensors with Red LNC cables and M-LNCS and Rainbow sensors with Rainbow RC cables.
- Philips IntelliVue and Tempus Pro: Philips lists a Masimo RD Rainbow SET cable for select IntelliVue devices, and its own adapter cable for Masimo LNCS sensors on modules with the Masimo SET option.
- Stryker and Zoll: LIFEPAK 15 and 35, LIFEPAK 20e, 20 and 12 and Zoll X Series and Propaq MD.
Masimo supplies for clinics and care sites
Our two best-selling reusable and three best-selling adhesive LNCS and M-LNCS sensors over the past year, plus Masimo replacement tape for Neo and Neo-3 sensors. "Listed for" names the monitors whose maker lists the part.
| Masimo PN | Description | Price | Stryker/Physio-Control PN | Zoll PN | Product page |
|---|---|---|---|---|---|
| 2501 | M-LNCS DCI, adult over 30 kg, reusable, 3 ft, Each. Listed for LIFEPAK 15, Zoll X Series/Propaq MD, Rad-57, Philips Tempus Pro | $195.00 | 11171-000046 | 8000-000459 | Masimo 2501 |
| 1863 | LNCS DCI, adult over 30 kg, reusable, 3 ft, Each. Listed for LIFEPAK 15, LIFEPAK 20e, Zoll X Series/Propaq MD, Rad-57 | $149.00 | 11171-000017 | 8000-0294 | Masimo 1863 |
| 2320 | LNCS Neo-3, neonatal under 3 kg or adult over 40 kg, adhesive, 3 ft, Box of 20. Listed for LIFEPAK 15, LIFEPAK 20e, Zoll X Series/Propaq MD, Rad-57 | $294.52 | 11171-000028 | 8000-0323 | Masimo 2320 |
| 2514 | M-LNCS Neo, neonatal under 3 kg or adult over 40 kg, adhesive, 18 in, Box of 20. Listed for LIFEPAK 15, Rad-57 | $282.50 | 11171-000042 | Masimo 2514 | |
| 2508 | M-LNCS Adtx, adult over 30 kg, adhesive, 18 in, Box of 20. Listed for LIFEPAK 15, Zoll X Series/Propaq MD, Rad-57 | $218.00 | 11171-000039 | 8000-000475 | Masimo 2508 |
| 2308 | LNCS Neo and Neo-3 replacement tape, Box of 102 | $101.33 | Masimo 2308 |
More sizes: LNCS and M-LNCS sensors, patient cables and the full Masimo collection.
Reusable or single-patient adhesive
Masimo's directions say to clean the M-LNCS and LNCS DCI finger sensors (2501 and 1863) prior to reuse on multiple patients. The adhesive sensors (2320, 2514 and 2508) are labeled single patient use only; after single-patient use, discard the sensor.
Handheld pulse oximeter
We also sell the handheld Masimo 9216 Rad-57 kit with SpO2, which measures SpO2, pulse rate and perfusion index; other kits are in Masimo pulse oximeters.
Clinic and care site Masimo questions
How do we clean a reusable M-LNCS or LNCS DCI sensor between patients?
Per Masimo's directions, remove the sensor from the patient and disconnect it from the patient cable, wipe it with a 70% isopropyl alcohol pad or mild detergent, and let it dry thoroughly before placing it on a patient. If low-level disinfection is required, use a 1:10 bleach and water solution, wipe again with sterile or distilled water, then dry with a clean cloth or gauze pad. Do not use undiluted bleach or any cleaning solution other than those recommended, because permanent damage to the sensor may occur.
Are these Masimo sensors made with latex?
No. Masimo's directions for the M-LNCS and LNCS DCI sensors and for the M-LNCS and LNCS adhesive sensors mark them as not made with natural rubber latex.
How often should an adhesive sensor site be checked?
Masimo's directions for LNCS and M-LNCS adhesive sensors say to inspect the sensor site at least every eight hours and to move the sensor to a different site if circulation or skin integrity has changed. Each adhesive sensor is for one patient; discard it after that patient.
Can a reusable DCI sensor be soaked in disinfectant?
No. Masimo's directions for the M-LNCS and LNCS DCI and DCI-P sensors say not to soak or immerse the sensor or connector in any liquid solution, and not to sterilize it by irradiation, steam, autoclave or ethylene oxide. Wipe it clean instead.