Bio-Med Devices Blender Hose Kit, 3 ft Oxygen and Air, 20063
The Bio-Med Devices 20063 is a blender hose kit with 3 ft oxygen and air high pressure hoses.12 It connects air and oxygen sources to an air/oxygen blender. It has the same specifications as the 10 ft 2006 and the 2 ft 20062.3
Product Highlights:
- 3 ft hoses: Blender Hose Kit with 3 ft hoses1
- Oxygen and air: Oxygen and air high pressure hoses2
- Same specs: 2006, 20062 and 20063 differ only in hose length3
- Source pressure: Blenders use air and oxygen sources at 50 psi4
What Is in the Box:
Specifications:
| Manufacturer | Bio-Med Devices, Inc.1 |
|---|---|
| Part number | 200631 |
| Hose length | 3 ft13 |
| Gases | Oxygen and air2 |
Size and Compatibility:
For Bio-Med Devices blenders. MVP-10 uses 2005MV, Crossvent uses 2005CV, and CV2i+ Stand Alone uses 2006A.13
Related Products:
- Blender Hose Kit, 2 ft, 20062
- High-Low Flow Blender with 70 and 15 LPM flowmeters, 2004F7015
- Low Flow Neo2 Blender, 2003FF
- 1 in Swivel Bracket, 2013BPS
- Dual Coiled O2/Air Hose, 15 ft, 1013
- Oxygen Blenders collection
Product Guides and Documents:
- Blender Hose Kits page2
- Air/High Pressure Oxygen Hoses page3
- Product Listing with Part Numbers (PDF)1
Frequently Asked Questions:
What is the difference between the 2006, 20062 and 20063 hose kits?
Hose length only: 10 ft, 2 ft and 3 ft. All three have the same specifications.31
What is a high pressure hose?
On Bio-Med Devices equipment it is the supply hose that carries gas from the source to the blender or ventilator inlet. Blenders use air and oxygen sources at 50 psi.45
Are there hose kits for a specific ventilator?
2005MV is the blender hose kit for the MVP-10. 2005CV is the blender hose kit for Crossvent with pole bracket 2013BH. 2006A is the hose kit for the CV2i+ Stand Alone ventilator.13
What supply pressure does a Bio-Med Devices blender use?
Air and oxygen at 50 psi, connected to two DISS fittings on the bottom of the blender. The rated supply range is 30 to 75 psi, and air and oxygen must stay within 10 psi of each other.4
What is an oxygen blender used for?
Oxygen administration, bubble CPAP therapy and HFNC therapy.6
Are these high pressure hoses?
Yes. The kit is listed as oxygen and air high pressure hoses.2
Does a blender need both an air and an oxygen hose?
Yes. The blender uses source air and oxygen, each connected to its own DISS fitting.4
Manufacturer Sources
- Bio-Med Devices. Product Listing with Part Numbers, REV060326 (accessed 2026-11-04). biomeddevices.com.
- Bio-Med Devices. Blender Hose Kits page (accessed 2026-11-04). biomeddevices.com.
- Bio-Med Devices. Air/High Pressure Oxygen Hoses page (accessed 2026-11-04). biomeddevices.com.
- Bio-Med Devices. Air/Oxygen Blender Service Manual, Catalog #2121, Rev 032709, archived copy of the manufacturer document (accessed 2026-11-04). frankshospitalworkshop.com.
- Bio-Med Devices. TV-100 Operator Manual, Part 5501 (accessed 2026-11-04). biomeddevices.com.
- Bio-Med Devices. Blender Gallery Product Sheet, DDOC063 Rev031925 (accessed 2026-11-04). biomeddevices.com.
Specifications are from Bio-Med Devices documents. Use only as directed in Bio-Med Devices labeling.1
| Item # | Image | Price | Quantity |
|---|---|---|---|
|
Bio-Med Devices Blender Hose Kit, 3 ft Oxygen and Air, 20063 BMD-20063 |
|
$110.00 ea
|
|
| Item # | Image | Description | Quantity |
|---|
