Ventilation with CPAP for EMS ground and air transport, and hospital settings
The pNeuton Model S Ventilator with CPAP (Continuous Positive Airway Pressure) provides mask CPAP plus volume or pressure ventilation for pediatric to adult patients in pre-hospital and hospital environments. Built tough for the rigors of EMS ground and air transport.
For early intervention, the built-in CPAP system allows you to start with face-mask CPAP and seamlessly switch to mechanical ventilation if needed without interruption. The built-in high output demand flow CPAP system with automatic sensitivity ensures critical care ventilation needs are optimized for spontaneous and mandatory breaths.
Fully pneumatic, the pNeuton S does not require batteries or electrical power so it is always ready for operation.
With simple-to-use controls – Tidal Volume, Respiratory Rate and Pressure Limit – the pNeuton S accommodates even the most challenging patients in respiratory distress.
UNIQUE ADVANTAGES
Fully pneumatic – No batteries or electricity needed
CPAP for EMS ground and air transport
Pediatric to adult patient support in pre-hospital and hospital settings
Mask CPAP plus volume or pressure ventilation
65% oxygen delivery significantly extends transport times for the most difficult patients
MRI conditional – 3 T or less
Small, compact, lightweight, portable
Easy-to-use controls
Made in Melbourne, Florida, USA
pNeuton Model S is designed for use in pre-hospital and hospital environments:
EMS Ground and Air Transport
ER and Trauma
MRI
OR
ICU
Intra-Hospital Transport
BENEFITS FOR THE PATIENT
Provides invasive or non-invasive patient support
Low patient Work of Breathing with peak flow of up to 140 L/min to meet patient needs
100% or 65% to match patient oxygen requirements
Switch from mask CPAP to mechanical ventilation seamlessly and without interruption
Calibrated CPAP and oxygen controls for easy operation
MRI conditional up to 3 T – place right next to the scanner with remote alarm output for the control room
Manometer to monitor patient pressure and effort
Built-in CPAP / PEEP system with automatic sensitivity for changing patient needs; no need for external CPAP valves
Night visible pressure gauge for patient monitoring
MonitorCO2with invasive/non-invasive ventilation
Oxygen powered – no batteries to change
Rugged and lightweight (6 lbs / 2.7 kg)
Protection for the caregiver from patient exhalation using the bacteria / viral filter
BENEFITS FOR YOUR BUDGET
Two oxygen levels; conserve oxygen with 65% setting
45-minute CPAP run time on a D cylinder
Demand flow CPAP system with minimal wasted oxygen
Economical patient circuits save on operating costs
No batteries or electronics decrease maintenance cost
HIGH PRESSURE OXYGEN HOSE
The High Pressure Oxygen Hose is used to connect the pNeuton Ventilators or MACS to an oxygen source. Hoses are MRI compatible (except for P/N 21085) and have female DISS connections on each end. International ISO colored hoses are also available.
Item #
In Stock
Price
Quantity
pNeuton Ventilator Model S Start-Up Kit: Includes Model S Ventilator, Travel Bag, and 8 ft High Pressure Oxygen Hose